View JR25WRHA-4P_9041424.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) 2018.8 ? waterproof circular connectors jr-w series product speci cations ratings current rating shell size no. of contacts current rating 13 3 10a 55a 16 7 10a 10 5a 21 10 10a 16 5a 25 4 30a 16 10a 24 5a ratings voltage rating shell size no. of contacts voltage rating 13 3 100v ac, 140v dc 5 16 7 100v ac, 140v dc 10 21 10 100v ac, 140v dc 16 25 4 300v ac, 420v dc 16, 24 100v ac, 140v dc ratings operating temperature range -25 to +85 ? storage temperature range -10 to +60 ? features 1. waterproof the jr-w series is a rugged, waterproof connector series that is ip67 and ip68 rated in the mated condition. ip67: left in water at a depth of 1m for 30 minutes ip68: left in water at a depth of 2m for 14 days 2. corrosion resistance the outer shell is plated to improve corrosion resistance, allowing this connector to be used in various environments. in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 1 item speci cations conditions 1. contact resistance 5m?max. jr16-10 contact crimping type : 10m?max. measured at dc 1a 2. insulation resistance 1,000m?min. jr25-4 contacts : 10,000m?min. measured at dc 500v 3. withstanding voltage no ashover or dielectric breakdown. ac 1,000v for 1 minute jr25-4 contacts : ac 3,000v for one minute 4. vibration resistance no electrical discontinuity for 10? or greater. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis derections, 2 hours each. 5. shock resistance no electrical discontinuity for 10? or greater. acceleration : 490m/s 2 , duration : 11ms 6 directions, 3 times each. 6. mating cycles contact resistance : 5m?max. jr16-10 contact crimping type : 10m?max. 500 times 7. temperaure cycle insulation resistance : 1,000m?min. jr25-4 contacts : 10,000m?min. -40? : 30 minute ? normal temperature : 10 to 15 minutes ? 100? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min. (at high humidity) 100m?min. (when dry) jr25-4 contacts: 100m?min. (at high humidity) 1,000m?min. (when dry) temperature : 40?, relative humidity : 90 to 95%, leave 96 hours 9. waterproof no water penetraction into the connector. mated connectors left in water at a depth of 1.8m for 48 hours. materials / finish parts material finish remarks outer shell aluminium alloy, brass black chromium plating ???? insulator phenol resin, pps resin ???? ul94v-0 contact copper alloy silver plating ???? waterproof packing nitrile rubber, silicone rubber ???? ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. plug and receptacle jr 13 wp a - 3pc (**) qw er tyu o cord clamp jr 13 wcc a - 4 (**) qw e r i o q model name : jr series w shell size shell size is the outer shell diameter of the mating end of the plug. e shell type wp : waterproof plug wr : waterproof receptacle wcc : waterproof clamp r shell variation : connectors are distinguished by a, b, or c if a shell variation is applied in the same form. t number of contacts. y contact form p : male contact s : female contact u contact termination method none : solder termination c : crimp termination i applicable cable diameter o other speci cations : a two-digit number is added to indicate other speci cations. 2 jr-w series waterproof circular connectors soldering type plug part no. hrs no. no. of contacts a b c d e f remarks jr13wp-3p(31) 114-2001-5 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5p(31) 114-2002-8 31 5 jr16wp-7p(31) 114-2003-0 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10p(31) 114-2004-3 31 10 jr21wp-10p(31) 114-2005-6 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16p(31) 114-2006-9 31 16 jr25wph-4p 114-2185-0 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16p(31) 114-2010-6 31 16 jr25wp-24p(31) 114-2011-9 31 24 jr13wp-3s(31) 114-2012-1 31 3 12.7 m18? 21.8 m16?.75 44.7 17 jr13wp-5s(31) 114-2013-4 31 5 jr16wp-7s(31) 114-2014-7 31 7 16.3 m22? 25.8 m20?.75 46.5 21 jr16wp-10s(31) 114-2015-0 31 10 jr21wp-10s(31) 114-2016-2 31 10 20.5 m26? 29.8 m24?.75 51 25.4 jr21wp-16s(31) 114-2017-5 31 16 jr25wph-4s 114-2183-4 4 24.7 m30? 33.8 m28?.75 56 29 jr25wp-16s(31) 114-2021-2 31 16 jr25wp-24s(31) 114-2022-5 31 24 note 1 : plugs must be used with cord clamps. note 2 : : denotes waterproof gaskets with a silicone rubber speci cation spanner fitting width f d b / - . c a e (representative example) jr25wph-4s 3 jr-w series waterproof circular connectors receptacle (flange type) part no. hrs no. no. of contacts a b c d e f remarks jr13wr-3p(31) 114-2023-8 31 3 15.9 m18? 26.6 26 20 16.3 jr13wr-5p(31) 114-2024-0 31 5 26.1 jr16wr-7p(31) 114-2025-3 31 7 19.9 m22? 26.6 29 23 20.3 jr16wr-10p(31) 114-2026-6 31 10 26.1 jr21wr-10p(31) 114-2027-9 31 10 23.9 m26? 26.6 32 26 24.3 jr21wr-16p(31) 114-2028-1 31 16 26.1 jr25wrh-4p 114-2184-7 4 27.9 m30? 28 35 29 28.3 jr25wr-16p(31) 114-2032-9 31 16 26.6 jr25wr-24p(31) 114-2033-1 31 24 26.1 jr13wr-3s(31) 114-2034-4 31 3 15.9 m18? 28 26 20 16.3 jr13wr-5s(31) 114-2035-7 31 5 27 jr16wr-7s(31) 114-2036-0 31 7 19.9 m22? 28 29 23 20.3 jr16wr-10s(31) 114-2037-2 31 10 27 jr21wr-10s(31) 114-2038-5 31 10 23.9 m26? 28 32 26 24.3 jr21wr-16s(31) 114-2039-8 31 16 27 jr25wrh-4s 114-2186-2 4 27.9 m30? 28 35 29 28.3 jr25wr-16s(31) 114-2043-5 31 16 jr25wr-24s(31) 114-2044-8 31 24 27 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation 2 10.5 panel dimensions f?.1 4?3.3 . - / (representative example) jr25wrh-4p 4 jr-w series waterproof circular connectors 20.6 31.2 28.5 20.7 +0.1 0 hex 27 m22? (panel thickness : 1.5mm to 6mm) panel cutout dimensions a 20 22 +0.1 0 . - ?35 23 a 10.5 2 panel cutout dimensions (panel thickness : 6.5mm max) width across flats : 32mm m281 m301 . - / 12.7 0.2 y 0 ?28.2 0.2 y 0 35 23 a 10.5 2 width across flats : 32mm m281 m301 / - . 12.7 0.2 y 0 28.2 0.2 y 0 panel cutout dimensions (panel thickness : 6.5mm max) part no. hrs no. no. of contacts a jr16wra-7p(31) 114-2143-0 31 7 26.6 jr16wra-10p(31) 114-2096-1 31 10 26.1 jr16wra-10s(31) 114-2145-5 31 27 part no. hrs no. no. of contacts a jrc25wrg-16p(31) 114-1032-3 31 16 26.8 jrc25wrg-24p(31) 114-1033-6 31 24 26.1 jrc25wrg-16s(31) 114-1043-0 31 16 27.8 jrc25wrg-24s(31) 114-1044-2 31 24 26.5 part no. hrs no. no. of contacts a remarks JR25WRHA-4P 114-1136-9 428 jr25wrha-4s 114-1135-6 note 1 : : denotes waterproof gaskets with a silicone rubber speci cation (representative example) (representative example) (representative example) soldering type receptacle (front nut-tightening type) receptacle (rear nut-tightening type) receptacle (rear nut-tightening type with hex nut) jr16wra-7p(31) jrc25wrg-16p(31) JR25WRHA-4P 5 jr-w series waterproof circular connectors crimp type plug receptacle(flange type) part no. hrs no. no. of contacts a b c d e f contact dia. jr16wp-10pc(31) 114-2114-1 31 10 16.3 m22? 25.8 m20?.75 46.5 21 1 jr21wp-10pc(31) 114-2115-4 31 20.5 m26? 29.8 m24?.75 51 25.4 1.6 jr16wp-10sc(31) 114-2122-0 31 16.3 m22? 25.8 m20?.75 46.5 21 1 note 1 : plugs must be used with cord clamps. part no. hrs no. no. of contacts a b c d e f contact dia. jr16wr-10pc(31) 114-2130-8 31 10 19.9 m22? 25.1 29 23 20.3 1 spanner fitting width f d - / . 4?3.3 10.5 2 panel dimensions f?.1 . / - (representative example) (representative example) jr16wr-10pc(31) jr21wp-10pc(31) 6 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (standard type) part no. hrs no. a b c d e jr13wcc-4(31) 114-2045-0 31 4 20 17 m16?.75 17 jr13wcc-5(31) 114-2046-3 31 5 jr13wcc-6(71) 114-2047-6 71 6 jr13wcc-7(31) 114-2048-9 31 7 jr13wcc-8(31) 114-2049-1 31 8 jr13wcc-9(31) 114-2050-0 31 9 jr13wcc-10(31) 114-2051-3 31 10 jr16wcc-4(71) 114-2052-6 71 4 23 17.5 m20?.75 21 jr16wcc-6(71) 114-2053-9 71 6 jr16wcc-8(71) 114-2054-1 71 8 jr16wcc-10(71) 114-2055-4 71 10 jr16wcc-12(71) 114-2056-7 71 12 jr21wcc-6(31) 114-2057-0 31 6 27 m24?.75 25.4 jr21wcc-8(31) 114-2058-2 31 8 jr21wcc-10(31) 114-2059-5 31 10 jr21wcc-12(31) 114-2060-4 31 12 jr21wcc-14(31) 114-2061-7 31 14 jr21wcc-16(31) 114-2062-0 31 16 jr25wcc-8(71) 114-2063-2 71 8 31 18 m28?.75 29 jr25wcc-10(71) 114-2064-5 71 10 jr25wcc-12(31) 114-2065-8 31 12 jr25wcc-14(31) 114-2066-0 31 14 jr25wcc-16(31) 114-2067-3 31 16 jr25wcc-18(71) 114-2068-6 71 18 jr13wcc-6(71) 7 jr-w series waterproof circular connectors b c spanner fitting width e d (representative example) cable clamp (simple type) part no. hrs no. a b c d e jr13wcca-4(31) 114-2069-9 31 4 19 7.5 m16?.75 17 jr13wcca-5(31) 114-2070-8 31 5 jr13wcca-6(71) 114-2071-0 71 6 jr13wcca-7(31) 114-2072-3 31 7 jr13wcca-8(31) 114-2073-6 31 8 jr13wcca-9(31) 114-2074-9 31 9 jr13wcca-10(31) 114-2075-1 31 10 jr16wcca-4(71) 114-2076-4 71 4 23 8 m20?.75 21 jr16wcca-6(71) 114-2077-7 71 6 jr16wcca-8(71) 114-2078-0 71 8 jr16wcca-10(71) 114-2079-2 71 10 jr16wcca-12(71) 114-2080-1 71 12 jr21wcca-6(31) 114-2081-4 31 6 27 m24?.75 25.4 jr21wcca-8(31) 114-2082-7 31 8 jr21wcca-10(31) 114-2083-0 31 10 jr21wcca-12(31) 114-2084-2 31 12 jr21wcca-14(31) 114-2085-5 31 14 jr21wcca-16(31) 114-2086-8 31 16 jr25wcca-8(71) 114-2087-0 71 8 31 8.5 m28?.75 29 jr25wcca-10(71) 114-2088-3 71 10 jr25wcca-12(31) 114-2089-6 31 12 jr25wcca-14(31) 114-2090-5 31 14 jr25wcca-16(31) 114-2091-8 31 16 jr25wcca-18(71) 114-2092-0 71 18 note : the simple cord clamp does not have the cable clamping ability as the standard cable clamp does. we recommend that you make sure that the clamping capability of the simple cord clamp is suf cient for your application. jr21wcca-16(31) 8 jr-w series waterproof circular connectors cap (without a chain) cap (with a chain) part no. hrs no. a b c remarks jr13wrc3 114-2170-2 21 11.5 m18? jr16wrc3 114-2171-5 25 m22? jr25wrc3 114-2172-8 33 m30? note 1 : : denotes waterproof gaskets with a silicone rubber speci cation part no. hrs no. a b c remarks jr13wrc4 114-2192-5 21 7 m18? jr13wrc5 114-2105-0 7.5 , plastic shell jr16wrc(31) 114-2162-4 31 25 7 m22? jr16wrc(75) 114-2162-4 75 jr25wrc(31) 114-2163-7 31 33 m30? jr25wrc(75) 114-2163-7 75 jr25wrc5 114-2175-6 7.5 , plastic shell note 1 : : denotes waterproof gaskets with a silicone rubber speci cation a b 3.3 6 80 b a (representative example) (representative example) jr16wrc(31) jr25wrc3 9 jr-w series waterproof circular connectors crimp contacts contact diameter 1.0mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc2-112 114-0243-3 1.6 2.0 20 to 24 awg jrc-pc2-122 114-0244-6 1.45 1.5 24 to 28 awg reel contacts jrc-pc2-212 114-0245-9 1.6 2.0 20 to 24 awg jrc-pc2-222 114-0246-1 1.45 1.5 24 to 28 awg female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc2-112 114-0247-4 1.6 2.0 20 to 24 awg jrc-sc2-122 114-0248-7 1.45 1.5 24 to 28 awg reel contacts jrc-sc2-212 114-0249-0 1.6 2.0 20 to 24 awg jrc-sc2-222 114-0250-9 1.45 1.5 24 to 28 awg note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 8,000 pcs. contact diameter 1.6mm male contact type part no. hrs no. b c applicable wire loose contacts jrc-pc-112 114-0239-6 2.3 2.9 16 to 20 awg reel contacts jrc-pc-212 114-0240-5 female contact type part no. hrs no. b c applicable wire loose contacts jrc-sc-112 114-0241-8 2.3 2.9 16 to 20 awg reel contacts jrc-sc-212 114-0242-0 note : loose contacts come in packages of 100 pcs. reel contacts come in reels of 5,000 pcs. tools contact dia. type item part no. hrs no. applicable contact applicable wire 1 manual manual crimping tool ht802 / rm-11 150-0401-6 jrc-pc2-112 jrc-sc2-112 20 to 24 awg ht802 / rm-12 150-0402-9 jrc-pc2-122 jrc-sc2-122 24 to 28 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc2-1 901-2037-1 jrc-pc2-212 jrc-sc2-212 20 to 24 awg ap105-jrc2-2 901-2038-4 jrc-pc2-222 jrc-sc2-222 24 to 28 awg extractor rm-tp 150-0008-7 1.6 manual manual crimping tool jrc-tc-11 150-0033-4 jrc-pc-112 jrc-sc-112 16 awg jrc-tc-12 150-0034-7 jrc-pc-112 jrc-sc-112 18 to 20 awg automatic automatic crimping machine body cm-105c 901-0001-0 applicator ap105-jrc-1 901-2039-7 jrc-pc-212 jrc-sc-212 16 to 20 awg extractor jrc-tp 150-0035-0 19.3 1.4 b c 23.7 2.4 b c 17 1.4 b c 24 b 2.4 c 10 jr-w series waterproof circular connectors work procedure 1.disassembly of connector (1) to remove the plug, remove the set screw, t a receptacle adaptive to the p shell unit to x, and remove he cord tube. (2) to remove the cord clamp, remove the cord tightening screws. (note 1) 2.connection 2.1 soldering type (1) use the cable so that the conductor can be soldered properly into the solder pot with the cable sheath diameter adaptive to each cord clamp. (2) after the terminal treatment of the cable with a size given in table 1, thread on the cable the clamp, washer, gasket, cord tube and coupling in this order and direction as shown above. (3) solder to connect the conductors to the terminals of the p shell unit. shrinkable tube is recommended to be used at the connecting part because insulating performance might deteriorate due to solder whiskers or dewing. after connecting, adjust to meet the c size. (note 2) 2.2 for crimping type connectors (1) please make sure to use a cable with the correct outer diameter for the cord clamp. it is also important that the wire and its outer diameter are appropriate for the crimp contacts. (2) pass the cables in order through the 1) tightening fitting, 2) washer, 3) gasket, 4) cord tube, and 5) coupling in the direction shown on the above gure, following terminal treatment as shown in table-2. (3) after crimping the applicable crimping contacts onto the conductor, insert the crimping contacts into the contact holes of the p-shell unit. after inserting, please make adjustments so that the dimension for section c shall be satis ed. note 2 ) 3.assembly of connector (1) fit the connected p shell unit to the receptacle xed with a vice or the like. torque the cord tube to the level as given in table-3. (2) fit the gasket, washer and clamp. torque the clamp to the level as given in table-3 while preventing the cable from being ratated. and, loctite japan co ltd. is recommended to be applied as locking. (note 3) (3) torque the set screw to 0.2 to 0.25n?. (4) torque the cord tightening screw (two positions) to 0.65 to 0.7n?.(note 1, 3) plug assemblies procedure the receptacle side is omitted because no special procedures are required. diagrammatical view note 1 : not required if a simple type cord clamp is used. note 2 : please maintain this dimension until assembly is complete. note 3 : cable clamping force, cable rotation force, and others aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. table 1 (solder type) shell size abc 13 (3) (12) 37 max. 16 (3) (14) 39 max. 21 (3) (17) 42 max. 25 (3) (20) 45 max. [unit : mm] table 2 (crimp type) shell size no. of contacts abc 16 10 3.5 to 4 (19) 39 max. 21 4 to 4.5 (22) 42 max. [unit : mm] table 3 shell size tightning torque 13 2 to 2.5 16 3 to 3.5 21 4 to 4.5 25 5 to 5.5 [unit : n?] coupling p shell unit c contact body shell gasket washer clamp cable spanner fitting part set screw clamp piece cord tightening screw cable jacket b a conductor insulator 11 jr-w series waterproof circular connectors contact position arrangement shell size 13, 16 13 16 no. of contacts 3 5 7 10 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. 1.7mm dia. 1.1mm dia. shell size 21 21 no. of contacts 10 16 withstand voltage 1,000v ac for 1 minute current capacity 10a 5a insulation resistance 1,000m?min. contact resistance 5m?max. solderpot inner diameter 1.7mm dia. 1.1mm dia. shell size 25 25 no. of contacts 4 16 24 withstand voltage 3,000v ac for 1 minute 1,000v ac for 1 minute current capacity 30a 10a 5a insulation resistance 10,000m?min. 1,000m?min. contact resistance 5m?max. 5m?max. solderpot inner diameter 3.4mm dia. 1.7mm dia. 1.1mm dia. remarks 1. figures are views of contact arrays of the mating end of male connectors. 2. the withstand voltage indicates the test voltage value. 12 jr-w series waterproof circular connectors precautions 1. switch off the power of the circuit before disconnecting or plugging-in the connectors. 2. use connectors with socket contacts at the power side of the circuit. 3. make sure that the coupling is in completely cocked position. 4. use the connector as the combination of water-proof types. 5. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? 13 jr-w series waterproof circular connectors

▲Up To Search▲

Price & Availability of JR25WRHA-4P

	To Download JR25WRHA-4P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .